Brisbane Concrete Core Drilling – Can You Do It Yourself?

If you’re interested in doing some Brisbane concrete core drilling by yourself, it is possible, but we recommend that you first educate yourself on the proper equipment to use and the techniques required to do an effective job. Otherwise, it will be just a messy project that will do more harm than good. Starting a core drilling job when you don’t know what you’re doing will be just a very expensive lesson that leaves you with damaged walls or floors that you now have to repair.

The first thing to know about Brisbane concrete core drilling is that it is a job that’s best left to the experts. This is a service that most construction companies list as part of their basic services. It involves expertly operating complicated drilling equipment to create clean, circular holes in concrete structures and surfaces. It is done on walls, floors, and sometimes ceilings when the job calls for it.

However, some plumbers and electricians who do work on residential or commercial buildings can sometimes use small core drilling tools to help them repair or install electrical wiring or water pipes. For bigger jobs, though, it is best to just give the job to a professional contractor.

If you’re interested doing some small concrete core drilling by yourself, here are some important tips to remember:

• You should first be certain about the largest hole you want to drill. Know its diameter size, and then decide if you’re going to be drilling by hand or with a rig. If you’re cutting small holes in brick or other soft material, doing the drilling using hand tools will be acceptable. However, if you want to cut bigger holes and in harder surfaces such as concrete, limestone, or masonry, then you should use a core drill stand.

• You should have a plan of what and where you are going to drill. It’s recommended that you first check if there are any rebar, sewer lines, gas lines, or electrical wiring in the way of where you want to drill. While you’re at it, you should also identify any hazards that the jobsite might present.

• Keep yourself safe. When drilling into floors above ground level, you should know that the concrete core will release and fall to the lower level. This presents major risk of injury to any personnel on the lower levels, so make sure that a barrier is installed around the area below the drilling site and it is guarded by another worker.

• Make sure that you have the right-sized core barrel that’s suitable for the material you’re going to drill, as well as the machine or rig you’re going to use. The horsepower of the machine you’re using should also be checked to make sure it can provide enough power to do the job, and also that there are several speed selectors.

There are several more factors that a DIY enthusiast should really consider before undertaking a job like this. More often than not, the risks alone are not worth it. Going to a professional company that knows how to do the job properly is a much better idea.